Lincoln 85770-2 SL-V Injector Manifold - Centro-Matic Grease Injector Manifold

Description

New - Never used.  Some opened, some not.
Been sitting on the shelf and wanting to sell to someone who can use them at less than half the original price.
Series SL-V
For single-line, high-pressure central lubrication system
For dispensing lubricants compatible with polyurethane seals up to NLGI No. 2
Output is externally adjustable
Indicator stem permits visual check of injector operation
May be combined in a circuit of Injectors SL-32, SL-33, SL-V XL, SL-1 and/or SL-11
Individual injectors can be easily removed for inspection or replacement
Each SL-V injector includes a clear polycarbonate protective cap.
Specifications:
Series SL-V
Carbon steel
Output:
Minimum: .015 cu. in. (.25 cc)
Maximum: .08 cu. in. (1.31 cc)
Operating pressure:
Minimum: 1850 psig (128 bar)
Maximum: 6000 psig (413 bar)
Typical: 2500 psig (172 bar)
Vent: 1000 psig (69 bar)
Manifold inlet: 3/8 in. NPTF(F)
Injector outlet: 1/8 in. NPTF(F)
Model
Type
Number of outlets
Dimensions
A
B
in.
mm
in.
mm
85770-1
One injector manifold
1
Single mounting hole
2-1/2
63
85770-2
Two injector manifold
2
Single mounting hole
3
76
85770-3
Three injector manifold
3
1-1/4
32
4-1/4
108
85770-4
Four injector manifold
4
2-1/2
63
5-1/2
140
85770-5
Five injector manifold
5
3-3/4
95
6-3/4
171
85770-6
Six injector manifold
6
5
127
8
203
85771
Replacement for manifold injectors
85772
Single injector/no manifold - 3/8 in. NPTF(M) inlet
Note:
Injector manifolds have 13/32 in. (10.3mm) diameter mounting holes for 3/8 in. bolt.
Injectors have polyurethane seals. Check compatibility with synthetic lubricants.
Injectors rated for 180°F (80°C)max. ambient temperature, depending on lubricant used.
Injectors include fitting for filling feedlines via alternate outlet port.
Output with adjustment screw hand-tightened is .015 cu. in. Maximum output is achieved with five turns at .014 cu. in./ turn.