4L Dual Digital Display Automatic Lubrication Pump Oiler Pump 6mm Oil Pipe 110V

Description

This product is fully automatic double digital display, the intermittent time and the fuel supply time are displayed at the same time. The BE type automatic intermittent moistening and clearing pump is composed of a miniature synchronous motor and a worm pot wheel reduction mechanism. As long as the power is connected, a lubricating device that can automatically sing and periodically supply oil can be realized. It can be adjusted from 2-6ml / cy according to the range of the output volume. Song time There are 6.10. 15. 30. 60. 120 minutes in total 6 specifications. Gear pump automatic control, working time 1-999, rest time 1-999 seconds can be arbitrarily adjusted according to the minutes of mechanical equipment, low noise, high efficiency, simple operation, suitable for gears of machine
This product is fully automatic double digital display, the intermittent time and the fuel supply time are displayed at the same time.
The BE type automatic intermittent moistening and clearing pump is composed of a miniature synchronous motor and a worm pot wheel reduction mechanism. As long as the power is connected, a lubricating device that can automatically sing and periodically supply oil can be realized. It can be adjusted from 2-6ml / cy according to the range of the output volume. Song time
There are 6.10. 15. 30. 60. 120 minutes in total 6 specifications. Gear pump automatic control, working time 1-999, rest time 1-999 seconds can be arbitrarily adjusted according to the minutes of mechanical equipment, low noise, high efficiency, simple operation, suitable for gears of machine tools, textile machinery, elevators, woodworking machinery, Rail lubrication, chain lubrication, etc. With the help of centralized lubrication accessories, automatic timing lubrication and quantitative lubrication can be achieved without manual operation.
Product parameters:
◆
Voltage:
110V / 60HZ
◆
Rated speed:
2800RPM
◆
Motor power:
25W
◆
Current: 0.35A
◆
Rated pressure (Kgt / cm '): 15
◆
Maximum pressure (Kgt / cm '): 35
◆
Effective volume:
1.5L
◆
Output (CC / MIN): 130 / 60HZ
◆
Volume efficiency: ≥75%
◆
Oil viscosity (c.st): 30-1000c.st
◆
The standard outlet of the pump is M10 * 1, choose 6mm oil pipe
◆
Lubrication pump has oil shortage warning, under pressure warning and oil leakage warning function.
Operation method:
1. SET button: Press this button to refuel or reset to eliminate abnormal sounds. Press and hold the key for 2 seconds to set the ACT time. Press and hold the key again for 2 seconds to set the INT time, and then press and hold the key to make a beep. The setting is completed.
2. UP / DOWN key: modify fuel (1-999 seconds), interval time (1-999 minutes) values.
3. RESET key: This key is used as a "SET" button. Press this button to re-fuel or reset to eliminate abnormal sounds.
4. After the lubrication pump is powered on, the system is in the oil supply state and enters the ACT and INT cycles. During fueling, the ACT light is on, the INT light is off, and the INT light is on. The display time decreases by the set value.
5. “ErO” flashes to indicate insufficient fuel, “ErP” flashes to indicate abnormal pressure, and “ErS” flashes to indicate that the system cannot run.
Package includes:
1 * 4L lubrication pump
On Jun-02-21 at 23:26:17 PDT, seller added the following information: